PRODUCT OVERVIEW
Hello Clean Filter will improve filter life and efficiency. It is specially formulated to cleanse suntan oil, greases, body oils, and scale and mineral deposits from pool filters. Regular use of Hello Clean Filter will assure proper filtration. It can be used on sand, cartridge, and Diatomaceous Earth (DE) filters.
PRODUCT HIGHLIGHTS
• Premium filter media cleaner will remove contaminants from filter media
• Will improve filter life and efficiency
ACTIVE INGREDIENTS
• Sodium Metasilicate Nonahydrate
• Ethylenediaminetetra Acetic Acid Tetrasodium Salt
• Diphosphoric Acid Tetrapotassium Salt
APPLICATION & DOSAGE
SAND FILTERS: Turn off inlets and outlets for all chemical feeders. Close main drain and place filter in backwash position. Slowly add one quart of this product through strainer while backwashing. Filter Cleaner can also be added through the sand fill port. Run filter until product begins to come out of the backwash water or until the product is seen through a filter viewing cell. Soak filter for 30 to 60 minutes. After soaking, backwash filter until water comes out clean and foam clears. Reverse procedure and start normal filter operation. For sand filters containing more than 300 lbs. of sand, add 2 qts. of this product.
CARTRIDGE FILTERS: Stop filter operation. Bleed off excess pressure through the filter safety valve. Open filter unit, remove cartridge from filter, and rinse excess dirt with a water hose from top to bottom. Place cartridge into a bucket and add 1 qt. of this product and 5 gallons of water. Make sure filter unit is completely covered by the cleaner. Soak 30 to 60 minutes. After soaking, rinse with hose at maximum pressure to remove excess filter cleaner or until foam residue is completely washed off. Re-install cartridge and resume normal filter operation.
DIATOMACEOUS EARTH FILTERS: Stop filter operation. Bleed off excess pressure through
safety valve. Remove filter elements (grids) from filter and rinse off excess dirt with a hose from top to
bottom. Place grids in a bucket and add 1 qt. of this product and 5 gallons of water. Make sure grids are
fully immersed in cleaner. Soak 30 to 60 minutes. After soaking, rinse out excess filter cleaner with hose
at maximum pressure. Re-install grid and add new filter media. Resume normal filter operation.
